Imperial 1000 Series Locker: Model O - Tennis Club 16"W x 18"D x 72"H

IMPERIAL 1000 SERIES NATURAL WOOD VENEER LOCKERS

AIA SPECIFICATIONS SECTION 10506 - NATURAL WOOD VENEER LOCKERS.

Requirements of Divisions 0 and 1 apply to work of this Section.

1.0 GENERAL

1.1 Scope of Work Included:

a. The furnishing and installation of prefabricated WIC Type I multiple self-supporting modular water resistant, custom grade, free-formaldehyde natural wood lockers.

1.2 Related Work Specified Elsewhere:

a. Architectural Woodwork - Section 06400

b. Wood Doors - Section 08200

c. Wood windows - Section 08210

1.3 Standards:

a. Minimum standard for water resistant, natural wood lockers shall conform to WIC "Manual of Millwork" latest edition.

1.4 Quality Assurance:

a. All parts and hardware shall be WIC compliant, structurally sound and free from defects, in material and workmanship under normal use and service for a period of three (3) years. All lock parts warranted for a period of one (1) year by the respective manufacturer.

1.5 Submittals:

a. Submit two copies of WIC compliant shop drawings for all items of finish work before fabrication.

b. Manufacturer's descriptive data of all materials and products construction, overall dimensions for installation of lockers, accessories, and trim.

c. Submit four (4) 4x4" stained finish on plain slice white birch veneer for architects approval.

1.6 Product Handling, Delivery & Storage.

a. Deliver all lockers when project construction is ready for installation. Store lockers in dry, ventilated area and protect all finishes from soiling and damage during handling.

2.0 PRODUCTS

2.1 Grades:

a. Furnish Imperial 1000 Series furniture grade natural wood veneer lockers in accordance with WIC "Manual of Millwork", Section 15-Natural Wood Casework for Custom and Premium grades.

2.2 Acceptable Manufacturer: a. Ideal Products, Inc. PO Box 4090, Ontario, CA 91761. Lockers to be Imperial 1000 Series Natural wood veneer lockers.

2.3 Materials:

a. Locker interior:

1. Interior vertical surfaces of sides and back panel are finish with 6mil frosty white vinyl.

2. Interior horizontal surfaces of shelves, tops and bottoms are finished with black thermal fused melamine.

3. Locker frame constructed of 48lb. industrial grade particleboard core ANSA A208.1 grade 1-M-2, 45(Sides=5/8", Shelves=3/4", Back=1/4")

4. Frame edged with natural wood veneer to match doors.

5. Locker venting through rear panel 32mm system.

b. Doors:

1. 3/4" select grade A-1 natural wood veneer. (specify species?)

2. Edging to match.

3. Natural woods: white or red oak, maple, cedar, birch, knotty pine, mahogany, alder, etc.

4. Cuts select from: rotary, plain sliced, quarter sawn.

c. End Panels and Fillers;

1. 3/4" select natural wood veneer. (specify species/)

2. edging to match.

d. Finish:

1. clear premium grade satin, 1 sealer and 2 finish coats, sanding between coats.

2. stains are available as specified.

2.4 Hardware:

a. Hinges, heavy duty, Euro-concealed, 6 way adjustable, 125 degree opening, self-closing, nickel plated, lifetime guarantee (CH).

b. Locks, heavy duty:

1. Campadlock hasp chrome or brass finish (CPH).

2. Keyed locks with two keys per lock and master keyed (KL) Specify chrome or brass finish.

3. Dial combination locksets with 3 positions and 5 changeable codes (DC) Nickel or brass finish.

4. Pushbutton Combination-fully mechanical, 5 button, 2000 combinations (PC). Specify satin chrome or satin brass?

5. Coin Collection (CC), Coin (CR) or Token Return (TR) and Card Operated (CL).

6. Digital lockset for either temporary (ATS) or permanent (APS)useage. Nickel finish.

c. Clothes hooks, aluminum finished ceiling hung double prong

d. Number Disc 1 1/4" recessed, 3/8" numerals. Black, satin chrome satin brass, or black. Specify sequence?

2.5 Fabrication:

a. Lockers shall be fabricated using blunt joint, nail and screw joinery.

b. Fabricate lockers square, rigid, and without warp.

c. Machine all parts and attachment holes accurately and without chips.

d. Fabricate corners, fillers, scribes, tops as required for installation.

3.0 EXECUTION

3.1 Construction:

a. Conform to requirements of WIC "Manual of Millworks", latest edition, for joinery requirements using blunt joint, nail and screw construction.

3.2 Installation:

a. Install lockers at the locations shown in accordance with manufacturer's instructions for plumb, level, rigid and flush installation.

b. Lockers are easily installed on a standard prefabricated 4 x 17 x 72" unfinished bases per locker room layout, cut to fit as required, level bases using readily available shim shingles.

c. Hang wall straps 72 1/2" (varies with locker height) inches above bases, spaced approximately 4 to 5 feet apart.

d. Stack lockers one next to the other per plans, allowing approximately 24" separation in corners, bolt each from together using manufacturer supplied fasteners through predrilled holes. Be sure to align leading edges of locker frames with each other as fasteners are tightened.

e. Install end and corner fillers and caps, cut to size in field per plans.

f. Install end panels.

g. Install number discs, clean lockers, remove all related trash and debris from jobsite.

3.3 Clean-up:

a. Upon completion of the work, remove surplus materials, rubbish and debris resulting from the operations under the section, including equipment and implements of service, and leave the entire structure and site insofar as the work of this section concerned in a neat, clean, and acceptable condition.